Sundolitt EPS is an extremely versatile product which makes it very popular with precast concrete manufacturers.

 

Not only does it offer improved insulation to any of their products, but it has exceptional strength and load-bearing capacity.

 

The application shown here is Lattice Girder Slabs

 

 

Also, due to its extremely low weight to volume ratio (EPS is 98% air), where Sundolitt EPS is used as a partial substitute for concrete, the weight of the finished concrete components is reduced, making them easier to handle and, where appropriate, reducing the total load pressure applied to the subsoil and any underlying services, beneath the construction. 

 

When used as a partial substitute for concrete, EPS will also shorten curing times, making for faster factory throughput.

 

EPS is also used at precast concrete plants, to protect finished goods either when they are being stored, or during delivery.

 

Sundolitt EPS is used in such precast products as:

It is available in a wide range of specifications, to suit every need.

 

Sundolitt offers:

       •  4 standard densities, each with a different design load

       •  4 standard Thermal Conductivity levels (or K Values)

       •  A wide range of sheet and block dimensions

       •  Other specifications to meet a client's individual requirements

 

Product	Density*      kg / m3	Thermal Conductivity*     W / mK	Compressive Stress* @ 10%  Deformation          kPa	Design Load*             kg / m2	Bending         Strength*         kPa
S70	15.0	0.038	70	7000	>50
S100	18.0	0.036	100	10000	>50
S150	23.5	0.035	150	15000	>50
S200	27.0	0.034	200	20000	>50

*all values are nominal

 

Click here to make an enquiry about Sundolitt EPS for Precast Concrete Products, and advise us of your requirements